TRUDESIGN THRU-HULL FLUSH

Description

The TRUDESIGN THRU-HULL FLUSH is for use below the water line where a recessed thru-hull fitting which sits flush with the hull is required. These thru-hulls/skin fittings are designed and made in New Zealand. The thru-hulls/skin fittings body and nut are moulded from glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings. This TRUDESIGN THRU-HULL FLUSH eliminates the corrosion and electrical bonding problems associated with metallic fittings.

Features:

• ISO 9093-2021 Small craft -TRUDESIGN thru-hulls/skin fittings and ball valves comply with ISO 9093:2021 and certified by the International Marine Certification Institute (IMCI).
• For sizes ¾” through to 3”, excludes the ½” size.
• American ABYC H-27 – 500Lb static load test – TRUDESIGN thru-hulls/skin fittings and ball valves meet the American ABYC H-27 – 500Lb static load test; Seacocks, Thru-Hull Fittings, and Drain Plugs – independently verified by IMANNA Laboratory Inc.
• For sizes 1¼” through to 3” the ABYC Collar it is not a requirement to meet this static load test.
• TruDesign ABYC Load Bearing Collar is required for the size ¾ and 1” to meet this static load test.
• The ½” does not meet the 500Lb static load test with or without the ABYC collar
• Compatible with most hull types – Can be used on wood or GRP hulls
• Immune to corrosion and electrolysis – long life with no concerns over decreased performance due to corrosion
• Chemical resistant – impervious to diesel, petrol and antifouling paints
• UV resistant – will not degrade or discolour with ultraviolet light from the sun
• High quality surface finish – will not discolour with green film as similar bronze fittings do
• Paintable – can be painted with all types of antifouling

Notice: Please do not hesitate to ask if it is in stock before purchasing. 

TRU DESIGN

Based in New Zealand, Tru Design specializes in the design, manufacture and marketing of high quality marine valves, skin fittings, hose nozzles and associated products.

All our products’ material come from New Zealand and are the latest high impact resistant composite plastic materials designed to meet the demands of the modern boating industry and conform to rigid ISO Marine Standards.

Established in 1974, we are an ISO 9001 company with over 30 year’s experience in design tooling and manufacture of injection moulded engineering plastics. We have over 50 staff including designers, engineers, toolmakers and quality assurance specialists. Tru Design is products from design concept through tooling and into moulded production, assembly, testing then product approval and despatch. 

Stones Boatyard
The Marine Store@Stones Boatyard
TRUDESIGN