TRUDESIGN THRU-HULL DOMED

Description

These superior TRUDESIGN THRU-HULL DOMED composite thru-hulls are for use above or below the waterline. The TruDesign range of certified skin fittings are designed and made in New Zealand, Their TRUDESIGN THRU-HULL DOMED body and nut are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings. TruDesign skin fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings.

Features

• ISO 9093-2021 Small craft -TRUDESIGN Skin Fittings and Ball Valves comply with ISO 9093:2021 and certified by the International Marine Certification Institute (IMCI).
• For sizes ¾” through to 3”.
• American ABYC H-27 – 500Lb static load test – TRUDESIGN Skin Fittings and Ball Valves meet the American ABYC H-27 – 500Lb static load test; Seacocks, Thru-Hull Fittings, and Drain Plugs – independently verified by IMANNA Laboratory Inc.
• For sizes 1¼” through to 3” the ABYC Collar it is not a requirement to meet this static load test.
• TruDesign ABYC Load Bearing Collar is required for the size ¾ and 1” to meet this static load test.
• The ½” does not meet the 500Lb static load test with or without the ABYC collar
• Compatible with all hull types – Can be used on aluminum, steel, wood or GRP hulls
• Immune to corrosion and electrolysis – Long life with no concerns over decreased performance due to corrosion
• Chemical resistant – Impervious to diesel, petrol and antifouling paints
• UV resistant – Will not degrade or discolour with ultraviolet light from the sun
• High quality surface finish – Will not discolour with green film as similar bronze fittings do
• Paintable – Can be painted with all types of antifouling.

Notice: Please do not hesitate to ask if it is in stock before purchasing. 

Stones Boatyard
The Marine Store@Stones Boatyard
TRUDESIGN
TRUDESIGN Product Lineups